Message

Reply | Reply all

Date Prev | Date Next | Thread Prev | Thread Next Date Index | Thread Index

From: tom.houtmeyers at bestnv.com<tom.houtmeyers@b...>
Date: Wed Apr 13 12:38:41 CEST 2005
Subject: [oc] i2c slave model
Hi,

I am also looking for a I2C slave in VHDL, would it be possible to get a
copy of it?

Thanks

Tom.

----- Original Message -----
From: kenneth.l.martin@b...<kenneth.l.martin@b...>
To:
Date: Mon Apr 19 20:06:44 CEST 2004
Subject: [oc] i2c slave model

> Hi,
>
> I need a slave to simulate my Opencore Master I2C design against.
> Can
> I get a copy of Scott's.
> ----- Original Message -----
> From: rchristian@c...
> To: cores@o...
> Date: Wed, 8 Oct 2003 19:46:30 +0200
> Subject: RE: [oc] i2c slave model
> >
> >
> > Not polished is not a problem. I have coded up an I2C master
> for a
> > design I am working on and am looking for something to test it
> > against.
> > Is this code still available?
> >
> > Ron
> >
> > ----- Original Message -----
> > From: "Morris, Scott J" <morris.scott@p... >
> > To: "'cores@o... '" <cores@o... >
> > Date: Tue, 29 Oct 2002 12:31:47 -0800
> > Subject: RE: [oc] i2c slave model
> >
> > >
> > >
> > > I have a form of a I2C slave in VHDL. It's not in the
> > polished
> > > state that
> > > most of the opencore projects are in. And what I have is
> a
> > > specific
> > > implementation. I'm using this I2C slave to act as a
> sentry
> > or
> > > gate for
> > > other I2C components. You send the gate's address and the
> > gate
> > > connects the
> > > other I2C devices onto the SDA and SCL lines. It
> disconnects
> > the
> > > devices
> > > once a stop signal is sent. This allowed me to have
> several
> > > identical
> > > boards, with I2C devices on them, that could be
> individually
> > > addressed.
> > > I've implemented it in a XC9536 and have been able to
> > communicate
> > > with it.
> > > It hasn't been rigorously tested and probably won't be
> (at
> > least
> > > not by me,
> > > project was cut back). But you are welcome to have a
> look.
> > >
> > > Scott
> > >
> > > > -----Original Message-----
> > > > From: ckh827@h... [mailto:ckh827@h... ]
> > > > Sent: Tuesday, October 29, 2002 11:55 AM
> > > > To: cores@o...
> > > > Subject: [oc] i2c slave model
> > > >
> > > >
> > > >
> > > >
> > > > HI, I need a VHDL version of i2c slave model(not
> > verilog).
> > > Anybody
> > > > know where I can find it? I tried so hard to code it
> but
> > has
> > > no
> > > > progress. Any help is appreciated.
> > > >
> > > >
> > > > ken
> > > >
> > >
> >
>
>

Follow up	Author
[oc] i2c slave model	Salvador Eduardo Tropea