|
Message
From: Mark McDougall<markm@v...>
Date: Tue Mar 22 07:50:11 CET 2005
Subject: [oc] OCIDEC3 testbench
Mark McDougall wrote:> iotest2 fails immediately but I'm yet to look into it.
OK, so it would seem that the testbench is for OCIDEC1 only, given the
return code on the STAT register. However, since they're supposedly
backwards-compatible, I've changed the expected test result and will
forge ahead!?!
Now I get setup violations...
# *** MODE SELECT: PIO mode: 0 iordy enable: 0
# ** Error: P:/MK7/fw/ide/ide at a/bench/ata_device.v(227): $setup(
ata_cs0:455 ns, posedge ata_dior &&& ata_rst_m0:515 ns, 70 ns );
# Time: 515 ns Iteration: 4 Instance: /test/a0
# *** MODE SELECT: PIO mode: 0 iordy enable: 1
# ** Error: P:/MK7/fw/ide/ide at a/bench/ata_device.v(227): $setup(
ata_cs0:86915 ns, posedge ata_dior &&& ata_rst_m0:86975 ns, 70 ns );
# Time: 86975 ns Iteration: 4 Instance: /test/a0
Investigations continue...
--
Mark McDougall, Software Engineer
Virtual Logic Pty Ltd, <http://www.vl.com.au>
21-25 King St, Rockdale, 2216
Ph: +612-9599-3255 Fax: +612-9599-3266
|
 |
Browse
